FaceLab

Orthodontics

Невидимые элайнеры и гладкие зубы: история Нишани с Clear Plus

Как элайнеры прямой 3D-печати Clear Plus с памятью формы — без наклеенных аттачментов и полностью незаметные — выровняли скученные передние зубы примерно за 5 месяцев.

Post-treatment view showing aligned upper front teeth after approximately five months of directly 3D-printed Clear Plus Shape Memory Aligner therapy
Pre-treatment view showing crowded and overlapping upper front teeth
Before
After

Patient

Nishani, age 34

Timeline

Около 5 месяцев (14 элайнеров прямой 3D-печати со сменой каждые 10 дней и прямым переходом к ретенции)

Treatment

Orthodontics

Treatment Approach

Лечение элайнерами прямой 3D-печати Clear Plus с эффектом памяти формы под руководством врача-ортодонта доктора Ватсалы Самаравиры. После ортодонтической диагностики и цифрового сканирования была изготовлена серия из 14 индивидуальных элайнеров для поэтапного выравнивания верхних передних зубов. Каждая капа носилась по 22 часа в сутки со сменой каждые 10 дней. Элайнеры печатаются напрямую из полимера с памятью формы Graphy Tera Harz, который поддерживает постоянное мягкое усилие без необходимости наклеивать композитные аттачменты на эмаль.

Nishani’s Story

В 34 года Нишани, специалист по маркетингу, давно мечтала выровнять скученные верхние передние зубы, но металлические брекеты не сочетались с ежедневными презентациями и встречами. В FaceLab доктор Ватсала Самаравира предложила ей элайнеры прямой 3D-печати Clear Plus, которые работают без наклеивания композитных бугорков-аттачментов на зубы. Нишани меняла капы каждые 10 дней и прошла курс из 14 элайнеров. Поскольку на зубы ничего не клеилось, поверхность эмали оставалась абсолютно гладкой и незаметной с первого до последнего дня. Примерно через 5 месяцев зубы заняли ровное положение, и пациентка сразу перешла к ношению ретейнера.

The Challenge

Nishani had wanted to straighten her front teeth for years. As a marketing professional, she presented and ran meetings daily — and the visibility of metal braces was a non-starter. Her front teeth were crowded and overlapped, making her hesitant to smile in photos and during work presentations. "I wanted to fix my teeth for years, but the thought of metal braces just didn't fit with my lifestyle," Nishani explains. "When I discovered Clear Plus aligners, I knew this was my chance."

Why Directly Printed Shape Memory Aligners Need No Attachments

Most clear-aligner systems are thermoformed — heated and pressed over a model — and require small tooth-coloured composite bumps bonded to the teeth to give the aligner something to grip. These attachments can be visible up close and feel rough against the tongue and lips. Clear Plus aligners are different. They are directly 3D-printed from Graphy Tera Harz, a shape memory resin that maintains consistent, gentle force across the full wear cycle — sustained loading that does the work that bonded attachments would otherwise be needed for. The shape memory behaviour also allows aligner changes every 10 days rather than the standard two weeks, shortening the overall treatment without compromising the movement. The result is a treatment that is genuinely invisible from start to finish.

  • Directly 3D-printed — not thermoformed
  • Completely smooth teeth throughout treatment — nothing bonded to the enamel
  • Truly invisible — no composite bumps visible up close
  • More comfortable — no rough spots catching on lips or tongue
  • 10-day aligner cycle — faster progression than conventional aligners
  • No attachment removal at the end of treatment

The Treatment Experience

Nishani received her custom-made aligners and changed to a new set every 10 days, with each aligner moving her teeth a small, planned increment closer to their final position. She wore the aligners 22 hours a day, removing them only for meals and oral hygiene. Over the course of treatment she progressed through 14 aligners, each one continuing the planned movement of the previous stage. Because directly printed Graphy aligners exert sustained, gentle force across the full 10-day cycle, Nishani described them as feeling "perfectly snug the whole time" — a contrast to colleagues using thermoformed systems whose attachments she described as visible and rough. Because nothing was bonded to her teeth, her tongue felt smooth tooth surfaces from day one to the final aligner.

  • Truly invisible — colleagues did not notice she was in treatment
  • Comfortable — gentle, sustained pressure rather than rough spots
  • Convenient — easy to remove for meals and meetings
  • Faster routine — change every 10 days
  • No drilling or bonding — nothing attached to the teeth at any point

The Result

Five months after starting, Nishani's previously crowded, overlapping front teeth were fully aligned into an even, harmonious smile line. There were no attachments to remove and no rough spots — her treatment ended exactly as it had begun: with smooth, natural-feeling teeth. The result transitioned directly into retention. "I still can't believe this is my smile," she says. "My teeth stayed smooth and clean throughout the entire process — and nobody at work ever realised I was wearing anything."

Nishani's Advice

"If you've been putting off straightening your teeth because you don't want braces or visible bumps, look into directly printed shape memory aligners. Mine were genuinely invisible. People literally couldn't tell."

The Outcome

Скученность передних зубов полностью устранена, сформирована ровная и гармоничная линия улыбки. Лечение прошло за 5 месяцев без единого аттачмента на зубах и осталось совершенно незаметным для коллег.

Treating Consultant

Dr. Wathsala Samaraweera

Orthodontics

Related Services

Clear AlignersAdult OrthodonticsBite Correction & Jaw Alignment

Ready to start your journey?

Book a consultation to discuss your treatment options with our specialists.

WhatsApp Запись