FaceLab

Orthodontics

隐形矫治、光滑牙面:Nishani 的 Clear Plus 矫治故事

直接 3D 打印的 Clear Plus 形状记忆隐形矫治器——无需牙面粘接附件、完全隐形贴合——在约 5 个月内成功排齐拥挤的上前牙。

Post-treatment view showing aligned upper front teeth after approximately five months of directly 3D-printed Clear Plus Shape Memory Aligner therapy
Pre-treatment view showing crowded and overlapping upper front teeth
Before
After

Patient

Nishani, age 34

Timeline

约 5 个月(共 14 副直接 3D 打印矫治器,每 10 天更换一次;完成后直接进入保持阶段)

Treatment

Orthodontics

Treatment Approach

由正畸专科顾问 Dr. Wathsala Samaraweera 主导的 Clear Plus 直接 3D 打印形状记忆隐形矫治。在完成全面正畸评估及数字化扫描记录后,为患者定制了 14 副矫治器,按阶段依次对上前牙进行旋转及排列矫正。每副矫治器每日佩戴 22 小时,每 10 天更换下一副。矫治器采用 Graphy Tera Harz 形状记忆树脂直接 3D 打印而成,在完整的 10 天佩戴周期内持续输出稳定而温和的矫治力——无需热压膜隐形矫治系统常见的牙面粘接树脂附件。

Nishani’s Story

34 岁的 Nishani 是一名市场营销专业人士,多年来一直希望矫正自己拥挤重叠的前牙,但传统金属牙套的外观无法适应日常频繁的客户会议与演讲。她专程来到 FaceLab 咨询 Clear Plus,并从正畸专科顾问 Dr. Wathsala Samaraweera 处了解到,直接 3D 打印的形状记忆隐形矫治器无需在牙面粘接任何附件即可完成矫治。 Nishani 每 10 天更换一副新矫治器,共佩戴 14 副。在整个疗程中,由于牙齿表面没有任何粘接凸起,她的舌头从第一天到最后一天接触到的都是光滑自然的牙面。 治疗开始约 5 个月后,Nishani 的前牙拥挤问题完全解决,无需磨除附件即可直接进入保持阶段。

The Challenge

Nishani had wanted to straighten her front teeth for years. As a marketing professional, she presented and ran meetings daily — and the visibility of metal braces was a non-starter. Her front teeth were crowded and overlapped, making her hesitant to smile in photos and during work presentations. "I wanted to fix my teeth for years, but the thought of metal braces just didn't fit with my lifestyle," Nishani explains. "When I discovered Clear Plus aligners, I knew this was my chance."

Why Directly Printed Shape Memory Aligners Need No Attachments

Most clear-aligner systems are thermoformed — heated and pressed over a model — and require small tooth-coloured composite bumps bonded to the teeth to give the aligner something to grip. These attachments can be visible up close and feel rough against the tongue and lips. Clear Plus aligners are different. They are directly 3D-printed from Graphy Tera Harz, a shape memory resin that maintains consistent, gentle force across the full wear cycle — sustained loading that does the work that bonded attachments would otherwise be needed for. The shape memory behaviour also allows aligner changes every 10 days rather than the standard two weeks, shortening the overall treatment without compromising the movement. The result is a treatment that is genuinely invisible from start to finish.

  • Directly 3D-printed — not thermoformed
  • Completely smooth teeth throughout treatment — nothing bonded to the enamel
  • Truly invisible — no composite bumps visible up close
  • More comfortable — no rough spots catching on lips or tongue
  • 10-day aligner cycle — faster progression than conventional aligners
  • No attachment removal at the end of treatment

The Treatment Experience

Nishani received her custom-made aligners and changed to a new set every 10 days, with each aligner moving her teeth a small, planned increment closer to their final position. She wore the aligners 22 hours a day, removing them only for meals and oral hygiene. Over the course of treatment she progressed through 14 aligners, each one continuing the planned movement of the previous stage. Because directly printed Graphy aligners exert sustained, gentle force across the full 10-day cycle, Nishani described them as feeling "perfectly snug the whole time" — a contrast to colleagues using thermoformed systems whose attachments she described as visible and rough. Because nothing was bonded to her teeth, her tongue felt smooth tooth surfaces from day one to the final aligner.

  • Truly invisible — colleagues did not notice she was in treatment
  • Comfortable — gentle, sustained pressure rather than rough spots
  • Convenient — easy to remove for meals and meetings
  • Faster routine — change every 10 days
  • No drilling or bonding — nothing attached to the teeth at any point

The Result

Five months after starting, Nishani's previously crowded, overlapping front teeth were fully aligned into an even, harmonious smile line. There were no attachments to remove and no rough spots — her treatment ended exactly as it had begun: with smooth, natural-feeling teeth. The result transitioned directly into retention. "I still can't believe this is my smile," she says. "My teeth stayed smooth and clean throughout the entire process — and nobody at work ever realised I was wearing anything."

Nishani's Advice

"If you've been putting off straightening your teeth because you don't want braces or visible bumps, look into directly printed shape memory aligners. Mine were genuinely invisible. People literally couldn't tell."

The Outcome

前牙拥挤完全解除,上前牙排列为匀称协调的笑线。全程约 5 个月完成,未粘接任何牙面附件,Nishani 表示同事在治疗期间几乎完全没有察觉。

Treating Consultant

Dr. Wathsala Samaraweera

Orthodontics

Related Services

Clear AlignersAdult OrthodonticsBite Correction & Jaw Alignment

Ready to start your journey?

Book a consultation to discuss your treatment options with our specialists.

WhatsApp 预约